1007 whitehead road ext., trenton, nj 08638 tel: (609) 538-8586 ? fax: (609) 538-8587 email: sales@stealthmicrowave.com ? web site: www.stealthmicrowave.com model SM2325-50 2300-2500 mhz 100 watt linear power amplifier for wll applications parameter specification frequency range 2.3 - 2.5 ghz pout (p1db) - 0 o to 55 o c +50 dbm third order intercept point +61 dbm (typ.) gain at rated power 59 db 1 db gain flatness over full band .5 db input/output return loss -14 db dc input voltage +12 volts dc input current, typ. 31 amperes mechanical dimensions (including heatsink and fans) 10.75 x 7.5 x 4.7 inches rf connectors input - sma female, output - n-type female operating temperature 0oc to +55oc operating humidity 95% non-condensing operating altitude up to 10,000 feet above sea level the SM2325-50 is a solid state gaas amplifier designed for the fixed wireless / wireless local loop markets. the amplifier operates over a frequency band of 2300 to 2500 mhz and has a p1 db of +50 dbm. the linear gain is +59 db, the gain flatness is 0.5 db over the full band, and the oip3 is +61 dbm typical. stealth uses the latest fet and surface mount technologies, allowing a compact size to fit into tightly packed transmitters. features ? mis-match protected ? single power supply ? over/reverse voltage protection ? thermal protection with auto reset options ? forward/reverse power detection ? rf sampling ? logic on/off control ? integral heatsink with two cooling fans configurations ? module
1007 whitehead road ext., trenton, nj 08638 tel: (609) 538-8586 ? fax: (609) 538-8587 email: sales@stealthmicrowave.com ? web site: www.stealthmicrowave.com model SM2325-50 2300-2500 mhz 100 watt linear power amplifier for wll applications dimensions in inches pin description values rf input input connector (female sma) - 9 dbm, typical rf out output connector (n-type female) + 50 dbm @ p1db rf sample sample rf port (female sma) 30 dbr gnd ground turret --- rev reverse power detector vswr @ + 50 dbm + 5.5 volts fwd forward power detector + 50 dbm output power + 5.5 volts +12vdc dc input voltage + 12 volts @ 31 amperes (typ.) on/off ttl logic on/off 0 volts = off, +5 volts = on specifications subject to change without notice.
|
